76 Lipson Street
Port Adelaide
South Australia 5015

Open Daily 10am – 4.30pm

ANZAC Day from 12pm. Christmas Day Closed

76 Lipson Street
Port Adelaide
South Australia 5015

Open Daily 10am – 4.30pm

ANZAC Day from 12pm
Christmas Day Closed

Home 9 Collection 9 Locomotive 702

Locomotive 702

South Australian Railways

Broad Gauge

Steam

Class operators: South Australian Railways

Condition: Excellent

Ownership: History Trust of South Australia

Provenance: South Australian Railways

Class: 700

Class Builders: Sir W. G. Armstrong-Whitworth and Co., Newcastle-on-Tyne, England

Number in class: 10

Number series: 700 – 709

Designer: F. J. Shea

Entered service: 20th September 1926

Condemned: 9th July 1964

Entered the museum: 1st June 1965

Length (over coupling points): 73’ 2’’ (22.3 metres)

Total Weight: 171 tons 3 cwt (171,152 kilograms)

Wheel Arrangement: 2-8-2

Driving Wheels Diameter: 57’’ (1448mm)

Maximum Axle Load: 18 tons 18 cwt (18,914 kilograms)

Boiler Pressure: 200 lbs psi

Cylinders: 2x outside – 22’’ x 28’’ (559mm x 711mm)

Valve Gear: Walschaert

Tractive Effort: 40,400 lbs

Coal Capacity: 17 tons (17,000 kilograms)

Grate Area: 47 square feet (4.36 square metres)

Water Capacity: 5,900 gallons (26,821 litres)

Mileage: 775,526 miles (1,248,088 kilometres)

Maximum Speed: 45 mph (72 km/h)

Historically No.702 is one of the most important locomotives in the museum’s collection, for it represents the third of Fred Shea’s most successful designs for the rehabilitation of the motive power of the South Australian Railways in the 1920s.

Besides the 700-class 2-8-2s, he also produced designs for the 500-class 4-8-2s and the 600-class 4-6-2s. All types were of the same general configuration and, though built in Great Britain by the Armstrong-Whitworth Company, were of classic North American style. No.702 was given builder’s number 645 of 1926 and was placed in service on 20th September 1926.

The 700s were main line freight locomotives and released many Rx-class 4-6-0s, until then the largest engines available for this traffic, for shunting and branch line services. The difference in power between the these two classes can be gauged by the fact that a 700 could lift 390,000kg over Mt Lofty while an Rx could manage only 190,000kg.

The 700-class proved so successful that another 10 were ordered, this time from the SAR’s own Islington Workshops. Though dimensionally similar to the original engines they differed in some minor details and so were classified 710. Unlike the 500 and 600 classes, which were substantially rebuilt, the 700s (with the exception of No.706) retained their classic ‘Webb’ lines throughout their lives. No.702 was the only member of the class to be equipped with a coal pusher in 1951. It was condemned 9th July 1964 and placed in the Mile End Railway Museum on 1st June 1965.

Collections at the National Railway Museum

Search Our Online Collections

Our rolling stock collection by category.

Crew and Service Stock

Freight Wagons

Locomotives

Maintenance Vehicles

Passenger Stock

Railcars